| 加工定制：是 | 品牌：toyota | 型号：MVCI |
| 类型：汽车故障检测仪 |
一、Xhorse MVCI 一款高性能的诊断工具和编程接口
主要功能
1.支持诊断，编程，主动测试。
2.支持绝大多数1996年后的车辆。
3.支持SAE J2534。
4.支持可编程电压，可以在OBD 6,9,11,12,13,14脚和AUX口设置5V-24V电压,
可以在OBD 6，9，11，12，13，14，15脚和AUX口设置接地。
5.三色LED指示灯。
二、支持的协议
1、K-Line ISO 9141
2、KWP2000 ISO 14230-4
3、SAE J1850 PWM
4、SAE J1850 VPW
5、CAN 2.0B ISO 11989
6、CAN ISO 15765-4
7、SCI SAE J2610
三、规格
工作温度：-20 to 70℃(-4 to 158 °F)
储存温度：-40 to 85℃(-40 to 185°F)
诊断接口：16Pin
USB接口 : USB 2.0
电源 ：DC 5V-36V
功率 ：1W
尺寸 ：95mm(3.74")长x49mm(1.93")宽x28mm(1.10")高
净重 : 85g
毛重 : 193g
四、随机附件
用户手册：关于产品的操作说明
驱动光盘：包括用户手册电子版，设备驱动，软件
OBD2连接线：产品与车辆连接线
USB连接线：产品与电脑连接线
MVCI TOYOTA TIS+HONDA HDS+VOLVO DICE
MVCI is a high performance factory diagnostics and reprogramming interface for TOYOTA TIS. MVCI is compatible with Toyota, Lexus, and Scion vehicles over the J1962 DLC3 connector.
Worked car model:
Honda, Toyota, Lexus and Volvo.
Feature:
Fully compatible with Toyota TIS Techstream
Supports Diagnostics, Reprogramming, Active tests, and key programming
Supports most 1996 and newer Toyota, Lexus, and Scion vehicles with OBDII/DLC3 diagnostics
Fully compatible with SAE J2534
Programmable power supply
Able to apply 5V-24V to OBD pins 6,9,11,12,13,14 or AUX 2.5mm stereo connector
Able to apply GND to OBD pins 6,9,11,12,13,14,15 or AUX 2.5mm stereo connector
RGB status LEDs
Supported Protocols:
Operating Temperature: -20 to 70
Storage Temperature: -40 to 85
Diagnostic Interface: 16 PIN
USB Interface : USB 2.0
Power: DC 5 V - 36 V
Consumption: 0.7 W
Dimensions: 95 mmL x 49 mmW x 28 mmH
Accessories Included:
User Manual: Instructions on tool operations
Driver CD: Includes user manual, drivers, and etc.
OBD II cable: Communicates between tool and vehicle
USB cable: Communicates between tool and PC/Laptop
Carry case: A nylon case to store the tool when not in use.
